The amount of steel produced globally in January 2017 was 136.5 million metric tons, a 1.75% increase. 136.5 million metric tons was also a 7% year-on-year increase from January 2016. The figures are based on some noteworthy estimates, according to the World Steel Association, including estimated output of 67.2 million metric tons from China, which represents an increase of 2.7% over the January 2016 result.
The World Steel Assn. records the monthly raw-steel output and capacity utilization statistics across 67 different countries, which as of this year also includes the levels of production from Vietnam. Raw (or crude) steel is the output of basic oxygen furnaces and electric arc furnaces that is cast into semi-finished products, such as slabs, blooms, or billets. World Steel reports tonnage and capacity utilization data for carbon and carbon alloy steel in 66 countries; data for production of stainless and specialty alloy steels are not included.
Towards the middle of 2016 World Steel revealed a short-range outlook for steel demand in 2017 and predicted that there will be a growth of 0.5%, reaching 1.51 billion metric tons. However, the results from January indicate that there will be a more stable situation for the global steel industry, an industry that has been consistently strained for the past three years, amid excess capacity and poor levels of demand.
The Chinese situation is particularly critical, as industrial demand has remained mainly flat, export opportunities have been reduced, and the nation’s central planners continue to implement an aggressive program of capacity reduction and forced consolidation of producers’ holdings.
The estimate of 67.2 million metric tons for China’s January output indicates an increase of 7.4% over the nation’s January 2016 output, which would be a high result indicated by a January 2016 drop in Chinese steel production.
Elsewhere in Asia, Japan’s steelmakers produced 9 million metric tons of raw steel in January 2017, an increase of 2.7% compared to January 2016.
World Steel estimated India’s January raw steel output at 8,400 metric tons, 11.98% higher than the year-ago total.
South Korea’s steelmakers produced 5.86 million metric tons during January, 3.2% more than the January 2016 result.
In the European Union, total raw-steel output for the 28 nations was 13.8 million metric tons, 7.47% higher than during December and 2. 43% higher than during January 2016.
Germany, the largest steel-producing nation in Europe, produced 3.65 million metric tons during January, 13.02% over the December output and 1.24% more than January 2016’s tonnage.
Italian steelmakers produced 1.825 million metric tons of raw steel during January, 2.76% over the preceding month but just 0.3% higher year-over-year.
Spain’s raw steel output for January was 1.163 million metric tons, or 25.6% higher than December. However, that figure is 4.2% lower than last January’s total.
French steelmakers also reported a marked year-over-year decline: January 2017 raw steel output there was 1.145 million metric tons, 0.2% higher than for December but 14.05% lower than for January 2016.
Beyond the EU, Russian steel output for January was 6.183 million metric tons, down 0.63% from December but 11.6% higher than the January 2016 result.
U.S. steelmakers’ January 2017 output rose to 6.874 million metric tons (7.58 million short tons), which is 6.46% more than the December result and 6.47% more than the January 2016’s output.
Last, World Steel Assn. reported that January’s raw-steel capacity utilization rate for the 67 countries was 68.5%, 0.9% more than December’s rate and 3.4% higher than for January 2016.
Source: WorldSteel, 2017
Shanghai Metal Corporation is a trusted aluminum alloy, aluminum foil price, stainless steel price and stainless steel manufacturer, kinds of stainless steel in china.
Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.
Link to this article：Global steel production increases by 7%
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks