The four-column Hydraulic Press is a product and keyword on the website. Therefore, it is necessary to have a comprehensive knowledge and understanding. Only in this way can the four-column hydraulic press be used correctly and reasonably, and together, the product has good performance. And use the effect instead of wasting every learning opportunity and letting yourself lose a lot.
- 1. How to adjust the parallelism of the four-column hydraulic press? To adjust the parallelism of the four-column hydraulic press, in the eyes of professionals in this field, it is not complicated and difficult. You only need to master the relevant professional knowledge to successfully complete the job. And what we need to know is that when adjusting the parallelism of the hydraulic press, the slider cannot slide down and the pressure-resistant pressure piers are placed after the Mold is removed. Due to the certain pressure during the adjustment process, to ensure the smooth progress of this operation .
- 2. How does the four-column hydraulic press achieve high speed? Is there a two-beam and four-column hydraulic press? The high-speed completion of the four-column hydraulic press, from a professional point of view, is accomplished by using the weight of the slider and the filling valve to compensate for the upper cavity oil. However, there is no two-beam and four-column hydraulic press, as long as the three-beam and four-column hydraulic press is a type of hydraulic press.
- 3. What are the components of the fuselage of the three-beam and four-column hydraulic press? The body weight of the three-beam and four-column hydraulic press, in detail, is related to the hydraulic press’s tonnage, stroke, opening or closing height, working table area, slider speed, and master cylinder layout. These parameters should be determined in the future. , And then calculate the body weight of the hydraulic press. In addition, if there is a comparable comparable estimating weight, otherwise, it is the demand to estimate the weight in the program design process.
- 4. Can the working cylinder and ejector cylinder of a four-column hydraulic machine work together? The oil cylinder in a four-column hydraulic machine is divided into a working oil cylinder and an ejector oil cylinder. Whether these two oil cylinders can work together, it is ok from the oil circuit. Just pay attention to the control aspect, and it is also easy to handle in the circuit. . However, from the point of view of machine design, it is not recommended that these two cylinders work together, because problems such as mutual jacking may occur, which will affect the normal operation of the hydraulic press.
Please keep the source and address of this article for reprinting：How to adjust the parallelism of the four-column hydraulic press
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machine Wiki，Thanks