Precision cnc machining parts is becoming more and more important in people's lives. What are the requirements for precision CNC machining ?
Precision CNC machining, not all materials can be precision CNC machined, some materials are too hard, more than the hardness of the machine parts, it may collapse the machine, so these materials are not suitable for precision CNC machining, unless it is special Mechanical parts made of materials, or laser cut.
For precision CNC machining materials are divided into two categories: metal materials and Non-metal materials.For metal materials, the hardness is the largest for stainless steel, followed by cast iron, followed by copper, and finally aluminum.
The processing of ceramics, plastics, etc. is a processing of non-metallic materials.1. The first is the hardness of the material. For some occasions, the higher the hardness, the better. It is only limited to the hardness requirements of the machined parts. The processed material should not be too hard. If it is harder than the machine, it cannot be processed.2. Secondly, the material is moderately soft and hard, at least one grade lower than the hardness of the machine. At the same time, it depends on what the function of the processed device is, and the material is reasonably selected.
In short, precision machining has some requirements on materials. Not all materials are suitable for processing. For example, materials that are too soft or too hard, the former is not necessary for processing, while the latter cannot be processed. Therefore, the most basic one is that you must pay attention to the density of the material before processing. If the density is too large, it is equivalent to the hardness. If the hardness exceeds the hardness of the machine (the turning tool), it cannot be processed. It can only damage parts and cause dangers, such as a car crash and go out and hurt people. Therefore, in general, for mechanical processing, the material of the material is lower than the hardness of the machine tool so that it can be processed.
For more detailed information, Welcome to check the website : www.ptjmachining.com
Previous: The specific production process of precision CNC machining partsNext: What factors in precision CNC machining will cause deformation of the workpiece ?
Link to this article：Materials requirements for precision CNC machined products
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks