Quasi-dry machining is a new type of machining method that replaces traditional lubrication and cooling methods with micro-lubrication.It has been applied in some enterprises.Under quasi-dry cutting conditions, the cutting process is different from traditional wet cutting. For example, the feed speed, cutting depth and cutting speed are different from traditional cutting, which is mainly manifested in the cutting edge of the cutting tool generally using negative chamfering to protect the cutting edge. ; The cutting principle involves a wider range of factors.At present, the theoretical basis of quasi-dry cutting is far less mature than the traditional metal cutting theory, and it is difficult to use a theory to analyze the processing mechanism of quasi-dry cutting.
Gear hobbing has a certain degree of particularity in terms of cutting motion, but it has something in common in terms of dry cutting processing theory and cutting mechanism. Its cutting theories include: green cutting theory, metal softening theory during cutting, low temperature brittleness and improved cutting cooling. The specific content includes: (1) Theoretical analysis of the cutting force when the cutting tool edge is worn and when it is not worn; (2) The cause of the serrated chip; (3) The effect of metal softening; (4) The roughness quality of the machined surface ; (5) MQL cooling and lubricating effect. Surrounding these theories and specific content can guide us to better apply quasi-dry machining to gear hobbing, so as to achieve good machining results, longer cutting tool life, and a clean machining environment.
In order to achieve a good machining effect, the general idea of using quasi-dry cutting for gear hobbing is to increase the cutting speed, shorten the contact time between the cutting tool and the workpiece, and allow the chips to take away a lot of cutting heat; supplemented by low-temperature cold air And micro lubrication technology. Adopting this kind of thinking is mainly based on the fact that most of the cutting energy will be converted into heat energy, and it is expected that the heat will be quickly taken away by the chips, and the heat conducted to the cutting tool and the workpiece will be minimized as much as possible. In this way, it is beneficial to extend the life of the cutting tool and reduce the thermal expansion of the workpiece. During high-speed gear hobbing, even under ideal conditions, a small amount of cutting heat is absorbed by the cutting tool. From the current application, the cutting heat of the cutting tool is cooled by compressed air, and the heat dissipation effect is obvious. If it is matched with low-temperature cold air , Will achieve a better processing effect.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：Micro-oil mist lubrication gear hobbing processing application
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank