In the hot summer, the car is running at a higher load, and the mechanical wear and aging fatigue will be worse than usual. Daily maintenance can make your car’s normal service life longer. Therefore, how to carry out summer maintenance work on the car in advance is very critical. Here are a few common summer maintenance tips for everyone.
1, engine maintenance
In summer, we should try to choose some higher viscosity oil, because the viscosity of the oil will change with the increase of temperature. When the temperature is higher, the viscosity of the oil will decrease, the oxidation resistance will be poor, and it will be easily deteriorated. The oil film formed inside the engine is thin and uneven, which is likely to cause failure. In addition, under the condition of ensuring sufficient lubrication, lubricating oil with corresponding viscosity should be selected according to the temperature range, engine temperature and actual vehicle conditions during use.
2, high temperature explosion-proof tire
Because the higher the temperature, the higher the air pressure inside the tire. In the hot summer weather, excessively high or low tire pressure can easily cause abnormal heat and instantaneous inflation of the tire. Therefore, in summer, pay special attention to frequently checking the tire pressure to keep it within the normal range. In addition, the tires are prone to overheating during long-term driving or high-speed driving in summer, and the air pressure increases at the same time. At this time, you should stop to dissipate heat, and it is strictly forbidden to bleed to reduce pressure or splash water to cool down. At the same time, due to the increase of rain in summer, to eliminate the impact of slippery roads on driving safety, it is necessary to check the tire pattern, including the tire pattern type and pattern depth. Generally speaking, manufacturers will set wear marks on tires. When the pattern is worn to the point that this mark is exposed, it means that we need to replace the tires.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.