The basic introduction for mechanical parts

Mechanical parts are composed of several surfaces. To study the relative relationship of the surface of the parts, a reference must be determined. The reference is the point, line, and surface on which the position of the other points, lines, and faces is determined. Benchmarks can be divided into design benchmarks and process benchmarks based on the different functions of the benchmark.classificationDesign basis: A reference used on a part drawing to determine the position of other points, lines, and faces is called a design basis.Process Benchmark: The benchmark used by parts during machining and assembly, called the process baseline. Process benchmarks are divided into assembly benchmarks, measurement benchmarks, and positioning benchmarks depending on the application.(1) Assembly basis: A reference used in assembly to determine the position of a part in a part or product, called an assembly basis.(2) Measurement reference: A reference used to check the size and position of a machined surface, called the measurement reference.(3) Positioning reference: The reference used for workpiece positioning during machining is called the positioning reference. As the surface (or line, point) of the positioning reference, only the unprocessed blank surface can be selected in the first process. This positioning surface is called the rough reference. The processed surface can be used as the positioning reference in the subsequent processes. This positioning surface is called the fine reference. [2]Lemo has over 40 cnc machining centers, include 3 axis,4 axis , 5 axis.We are expert on CNC machining ,CNC milling, CNC turning processing, precision grinding
 pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: Details about Machining allowanceNext: Process design for machining

Link to this article:The basic introduction for mechanical parts

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks